Subaru 2009 IMPREZA Service Manual page 2401

Clear Memory Mode
ABS (DIAGNOSTICS)
9. Clear Memory Mode
A: OPERATION
1) On «Main Menu» display, select {Each System
Check}.
2) On «System Selection Menu» display, select
{Brake Control System}.
3) Click the [OK] button after the {ABS} is dis-
played.
4) On «Brake Control Diagnosis» display, select
{Clearing Memory}.
5) When the "Clear Memory?" is shown on the
screen, click the [YES] button.
6) When "Done" and "Turn off the ignition switch."
are shown on the display screen, turn the ignition
switch to OFF.
NOTE:
For detailed operation procedures, refer to "PC ap-
plication help for Subaru Select Monitor".
ABS(diag)-21