Subaru 2009 IMPREZA Service Manual page 1938

Hide thumbs Also See for 2009 IMPREZA:

AUTOMATIC TRANSMISSION

29.Parking Pawl

1) Remove the transmission assembly from vehicle

body. <Ref. to 4AT-36, REMOVAL, Automatic

Transmission Assembly.>

2) Remove the rear wheel speed sensor, and sep-

arate the extension case from transmission case.

<Ref. to 4AT-71, REMOVAL, Extension Case.>

3) Remove the reduction drive gear. <Ref. to 4AT-

80, REMOVAL, Reduction Drive Gear.>

4) Remove the parking pawl, return spring and

(A) Return spring

(B) Parking pawl

B: INSTALLATION

1) Install the parking pawl, return spring and shaft.

(A) Return spring

(B) Parking pawl

2) Install the reduction drive gear. <Ref. to 4AT-80,

INSTALLATION, Reduction Drive Gear.>

3) Install the rear vehicle speed sensor and exten-

sion case. <Ref. to 4AT-71, INSTALLATION, Ex-

tension Case.>

4) Install the transmission assembly to the vehicle.

<Ref. to 4AT-40, INSTALLATION, Automatic

Transmission Assembly.>

C: INSPECTION

Check the tab of the parking pole on the reduction

gear for wear or other damage.

Parking Pawl