Rear Brake Pad - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

5. Rear Brake Pad

1) Lift up the vehicle, and then remove the rear

2) Remove the brake hose bracket.

3) Remove the caliper bolt.

4) Raise the caliper body and support it.

Do not disconnect the brake hose from the caliper

5) Remove the pad.

Rear Brake Pad

B: INSTALLATION

1) Apply a thin coat of Molykote M7439 (Part No.

K0770YA000) or grease contained in the pad kit to

the pad clip.

2) Apply a thin coat of Molykote AS880N (Part No.

K0777YA010) or the grease contained in the pad

kit to the contact surface between the pad and

3) Apply a thin coat of Molykote AS880N (Part No.

K0777YA010) or grease contained in the pad kit to

both surfaces of the pad inner shim.

4) Install the pad to support.

5) Install the caliper body to the support.

Tightening torque:

27 N·m (2.8 kgf-m, 19.9 ft-lb)

6) Install the brake hose bracket.

Tightening torque:

33 N·m (3.4 kgf-m, 24.3 ft-lb)