Subaru 2009 IMPREZA Service Manual page 2184

FRONT SUSPENSION
1. General Description
A: SPECIFICATION
Wheel arch height
+12 mm
(Tolerance:
–24 mm
Camber (Tolerance: 0°45 Differences between RH
and LH: 45 or less)
Caster (Referential Value)
Front
Steering angle (Tolerance: 1.5°)
Toe-in
Kingpin angle (Referential Value)
Wheel arch height
+12 mm
(Tolerance:
–24 mm
Camber (Tolerance: 0°45 Differences between RH
Rear
and LH: 45 or less)
Toe-in
Thrust angle (Tolerance: 0°30 )
NOTE:
• Front and rear toe-in and front camber can be
adjusted. Adjust if the toe-in or camber tolerance
exceeds specifications.
• Other items indicated in the specifications is not
equipped with adjustment mechanisms. If other
items exceed specifications, check the suspension
parts and connections for deformation. If defective,
replace with new parts.
(1) Front
A – B = Positive: Toe-in, Negative: Toe-out
= Individual toe angles
General Description
Model
mm (in)
+0.47 in
( ))
–0.94 in
Inner
wheel
Outer
wheel
mm (in)
mm (in)
+0.47 in
( ))
–0.94 in
mm (in)
B
(1)
A
FS-00269
OUTBACK Non-turbo
392 (15.4)
–0°05
5°50
37.9°
33.5°
0 3 (0 0.12) Toe angle (sum of both wheels): 0° 0°15
13°30
380 (15)
–1°05
0 3 (0 0.12) Toe angle (sum of both wheels): 0° 0°15
FS-2
Turbo (except Turbo
for WRX-SS) (WRX-SS)
387 (15.2)
–0°10
5°55
37.8° 37.2°
33.4° 32.9°
13°35
375 (14.8)
–1°15
0°