Subaru 2009 IMPREZA Service Manual page 1849

CONTROL SYSTEMS
7. MT Gear Shift Lever
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Remove the gear shift knob.
4) Remove the console front panel and console
boot.
: (A)
(A) Hook
5) Remove the console cover and console box.
<Ref. to EI-48, REMOVAL, Console Box.>
6) Remove the clamp.
7) Remove the bushing and insulator assembly.
MT Gear Shift Lever
8) Remove the harness clamp from the plate as-
sembly.
9) Remove the plate assembly from the vehicle
body.
CS-00883
10) Lift up the vehicle.
11) Remove the rear exhaust pipe and muffler.
• Non-turbo model
<Ref. to EX(H4SO)-10, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-12, REMOVAL, Muf-
fler.>
• Turbo model
<Ref. to EX(H4DOTC)-13, REMOVAL, Rear Ex-
haust Pipe.> <Ref. to EX(H4DOTC)-15, REMOV-
CS-00898
AL, Muffler.>
12) Remove the heat shield cover.
CS-00899
CS-32
CS-00313
CS-00888
MT-01660