Subaru 2009 IMPREZA Service Manual page 1841

Hide thumbs Also See for 2009 IMPREZA:

CONTROL SYSTEMS

1) Clean all the parts before assembly.

2) Apply NIGTIGHT LYW No. 2 grease or equiva-

lent to each part. <Ref. to CS-3, AT SELECT LE-

VER, COMPONENT, General Description.>

3) Assemble in the reverse order of disassembly.

• Set the select lever to "D" range (normal mode

position) when installing the guide plate and be

careful of the following.

• Insert the protrusion (B) of the guide plate into

the hole on shift lock solenoid unit (A).

• Insert link (D) of the shift lock release into link

Select Lever

• Connect the switch and solenoid terminals to the

(A) "P" range switch (color code: white)

(B) "P" range switch (color code: black)

(D) Shift lock solenoid (color code: black)

(E) SPORT mode switch (color code: white)

(F) SPORT mode switch (color code: black)

4) After completing installation, shift the select le-

ver from "P" range to "D" range, then check wheth-

er the indicator and select lever matches, whether

the pointer and position mark matches and whether

the operating force occurs.

E: INSPECTION

1) Inspect the removed parts by comparing with

new parts for deformation, damage and wear. Re-

pair or replace if defective.

2) Confirm the select lever operating condition be-

fore assembly. Normal if it operates smoothly.