20.Transmission Control Module
(TCM)
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower cover and
disconnect the connector.
3) Disconnect the connector from TCM.
(A)
(A) Transmission control module (TCM)
(B) Brake pedal
4) Remove the TCM.
B: INSTALLATION
1) Install the TCM.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
(A)
(A) Transmission control module (TCM)
(B) Brake pedal
2) Connect the connector to TCM.
3) Install in the reverse order of removal.
4) Perform learning control promotion. <Ref. to
4AT(diag)-17, FACILITATION OF LEARNING
CONTROL, OPERATION, Subaru Select Moni-
tor.>
Transmission Control Module (TCM)
(B)
AT-04579
(B)
AT-04579
4AT-63
AUTOMATIC TRANSMISSION