Subaru 2009 IMPREZA Service Manual page 2298

Hide thumbs Also See for 2009 IMPREZA:

DIFFERENTIALS

5) Keep the side retainers separate to make it pos-

sible to identify RH and LH sides. Remove the side

retainer attachment bolts, set the ST to differential

case, and extract the side retainers RH and LH with

Side retainer shim of each side should be kept to-

gether with its mating retainer.

ST 398457700

6) Pull out the differential case assembly from the

differential carrier.

Be careful not to hit the teeth against the case.

7) When replacing the side bearing, remove the

bearing cup from the side retainer using ST.

ST 398527700

Rear Differential

8) Remove the bearing cone with ST.

• Do not attempt to disassemble the parts unless

• Set the puller so that its claws catch the edge of

the bearing cone.

• Never mix up the RH and LH bearing races and

ST 18759AA000 PULLER ASSY

9) Remove the hypoid driven gear by loosening hy-

poid driven gear bolts.

10) Drive out the pinion shaft lock pin from the hy-

poid driven gear side.

The lock pin is staked at the pin hole end on the dif-

ferential carrier. Do not drive it out forcibly before

removing the stake.

ST 899904100

STRAIGHT PIN REMOVER