Subaru 2009 IMPREZA Service Manual page 1905

C: REMOVAL
1) Set the vehicle on a lift.
2) Set the select lever to "N" range.
3) Lift up the vehicle.
4) Remove the front and center exhaust pipes.
(Non-turbo model) <Ref. to EX(H4SO)-6, REMOV-
AL, Front Exhaust Pipe.> <Ref. to EX(H4SO)-9,
REMOVAL, Center Exhaust Pipe.>
5) Remove the center exhaust pipe. (Turbo model)
<Ref. to EX(H4DOTC)-8, REMOVAL, Center Ex-
haust Pipe.>
6) Remove the snap pin and washer from the
shifter arm.
(C)
(A) Shifter arm
(B) Snap pin
(C) Select cable
(D) Washer
7) Remove the plate assembly from the transmis-
sion case.
(A)
(B)
(A) Select cable
(B) Plate ASSY
Inhibitor Switch
(D)
(B)
(A)
AT-04867
CS-00955
4AT-49
AUTOMATIC TRANSMISSION
8) Using the ST, remove the spring pin and remove
the shifter arm.
ST 398791600 REMOVER
(A) Spring pin
(B) Shifter arm
9) Remove the two inhibitor switch securing bolts.
(A) Inhibitor switch
10) Remove the inhibitor switch from the transmis-
sion.
(A) Inhibitor switch
11) Disconnect the inhibitor switch harness con-
nector from the inhibitor switch.
(B)
(A)
AT-04868
(A)
AT-04785
(A)
AT-04786