Subaru 2009 IMPREZA Service Manual page 1840

8) Raise the claw of connector.
9) Disconnect the terminals of the SPORT mode
switch, "P" range switch, and shift lock solenoid
from the connector, using a flat tip screwdriver with
a thin tip.
(A) "P" range switch terminal
(B) Shift lock solenoid terminal
(C) SPORT mode switch terminal
10) Remove the grommet.
11) Pull out the spring pin.
Select Lever
12) Pull out the arm assembly, remove select lever
COMPL, and remove bracket arm detent and bush-
ing.
CS-00292
(B) (A)
13) Remove the rod detent and spring detent from
4 3 2 1
the bracket arm detent.
10 9 8 7 6 5
(C)
CS-00293
CS-00296
CS-00297
CS-23
(D)
(C)
(A) Arm ASSY
(B) Selector lever COMPL
(C) Bracket arm detent
(D) Bushing
(C)
(A) Rod detent
(B) Spring detent
(C) Bracket arm detent
CONTROL SYSTEMS
(B)
(A)
CS-00992
(A)
(B)
CS-00383