Subaru 2009 IMPREZA Service Manual page 2367

ABS
2. ABS CONTROL MODULE AND HYDRAULIC CONTROL UNIT (ABSCM&H/U)
(1) ABS control module and hydraulic
control unit (ABSCM&H/U)
(2) Front outlet RH
(3) Rear outlet LH
(4) Rear outlet RH
(5) Front outlet LH
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the battery ground ca-
ble from the battery.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
General Description
(6)
T2
(11)
T2
(6) Primary inlet
(7) Secondary inlet
(8) Damper
(9) Spacer
(10) Damper
(5)
(4)
(3)
(2)
(7)
(8)
(10)
ABS-4
(1)
(9)
T1
T2
(11) Bracket
Tightening torque:N·m (kgf-m, ft-lb)
T1: 7.5 (0.76, 5.5)
T2: 33 (3.4, 24.3)
ABS00938