Subaru 2009 IMPREZA Service Manual page 2151

5) Inspect the clearance between 5th drive gear
and coupling sleeve. If any clearance is not within
specifications, replace the shifter fork as required.
Clearance (a):
9.3 mm (0.366 in)
(A) (a)
(a) Measured value
(A) 5th drive gear
(B) Coupling sleeve
5th shifter fork
Part No. Mark
32812AA201 7
32812AA211 No mark
32812AA221 9
6) Inspect the rod end clearances (A) and (B). If
any clearance is not within specifications, replace
the rod or fork as required.
Clearance (A):
3rd-4th — 5th
0.5 — 1.3 mm (0.020 — 0.051 in)
Clearance (B):
1st-2nd — 3rd-4th
0.4 — 1.4 mm (0.016 — 0.055 in)
(A), (B) Measured value
Shifter Fork and Rod
(B)
MT-01512
Content
Approaches 5th gear by
0.2 mm (0.008 in).
Standard
Moves away from 5th gear
by 0.2 mm (0.008 in).
MT-00316
MANUAL TRANSMISSION AND DIFFERENTIAL
5MT-79