Subaru 2009 IMPREZA Service Manual page 2402

ABS Warning Light / Brake Warning Light Illumination Pattern
ABS (DIAGNOSTICS)
10.ABS Warning Light / Brake Warning Light Illumination Pattern
A: INSPECTION
(2)
(1)
(6)
(5)
(6)
(9)
(10)
(1) Ignition switch
(2) OFF
(3) ON
(4) Engine start
1) When the ABS warning light and brake warning light do not illuminate in accordance with this illumination
pattern, it can be thought that there is an electrical problem.
2) When the ABS warning light remains constantly OFF, check the combination meter circuit. <Ref. to
ABS(diag)-23, ABS WARNING LIGHT DOES NOT COME ON, ABS Warning Light / Brake Warning Light Il-
lumination Pattern.>
3) When ABS warning light does not go off, check the combination meter circuit. <Ref. to ABS(diag)-23, ABS
WARNING LIGHT DOES NOT GO OFF, ABS Warning Light / Brake Warning Light Illumination Pattern.>
4) When the brake warning light does not go off, check the brake warning circuit and the combination meter
circuit. <Ref. to ABS(diag)-24, BRAKE WARNING LIGHT DOES NOT GO OFF, ABS Warning Light / Brake
Warning Light Illumination Pattern.>
(3)
(7)
(8)
(5) ABS warning light
(6) Light OFF
(7) Light ON
(8) 1.5 sec.
ABS(diag)-22
(4)
(6)
(7)
(9) Brake warning light
(EBD warning light)
(10) Parking brake
(11) Released
(3)
(6)
(11)
ABS00442