Subaru 2009 IMPREZA Service Manual page 2672

8. Reservoir Tank
A: REMOVAL
1) Drain fluid from the reservoir tank.
2) Disconnect the hose from reservoir tank.
CAUTION:
To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with clean cloth.
(3)
(1)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
3) Remove the reservoir tank from the body.
B: INSTALLATION
1) Install the reservoir tank to the body.
Tightening torque:
13 N·m (1.3 kgf-m, 9.6 ft-lb)
2) Connect the hose to the reservoir tank.
(3)
(1)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
3) Replenish power steering fluid up to the speci-
fied level. <Ref. to PS-50, INSPECTION, Power
Steering Fluid.>
C: INSPECTION
Check the reservoir tank for cracks, breakage or
damage. If a failure is found, replace the reservoir
tank.
Reservoir Tank
(2)
PS-00799
(2)
PS-00799
POWER ASSISTED SYSTEM (POWER STEERING)
PS-49