Subaru 2009 IMPREZA Service Manual page 2335

Hide thumbs Also See for 2009 IMPREZA:

General Description

DRIVE SHAFT SYSTEM

• Wear appropriate work clothing, including a cap,

protective goggles and protective shoes when per-

forming any work.

• Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

• Keep the disassembled parts in order and pro-

tect them from dust and dirt.

• Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary re-

moval, installation, disassembly and replacement.

• Vehicle components are extremely hot after driv-

ing. Be wary of receiving burns from heated parts.

• Use SUBARU genuine grease etc. or equivalent.

Do not mix grease etc. of different grades or man-

• Be sure to tighten fasteners including bolts and

nuts to the specified torque.

• Place shop jacks or rigid racks at the specified

• Apply grease onto sliding or revolving surfaces

before installation.

• Before installing snap rings, apply sufficient

amount of grease to avoid damage and deforma-

• Before securing a part on a vise, place cushion-

ing materials such as wood blocks, aluminum

plates, or waste cloth between the part and the