Subaru 2009 IMPREZA Service Manual page 1924

Hide thumbs Also See for 2009 IMPREZA:

AUTOMATIC TRANSMISSION

23.Oil Charge Pipe

1) Remove the air intake chamber. (Non-turbo

model) <Ref. to IN(H4SO)-7, REMOVAL, Air Intake

2) Remove the intercooler. (Turbo model)

<Ref. to IN(H4DOTC)-13, REMOVAL, Intercool-

3) Remove the oil charge pipe, and then remove

the O-ring from the flange side.

(A) ATF level gauge

(B) Oil charge pipe

B: INSTALLATION

1) Apply ATF on a new O-ring and install together

with the oil charge pipe.

Use a new bolt.

Tightening torque:

38 N·m (3.9 kgf-m, 28.0 ft-lb)

(A) ATF level gauge

(B) Oil charge pipe

2) Install the air intake chamber. (Non-turbo model)

<Ref. to IN(H4SO)-7, INSTALLATION, Air Intake

3) Install the intercooler. (Turbo model)

<Ref. to IN(H4DOTC)-13, INSTALLATION, Inter-

Oil Charge Pipe

C: INSPECTION

Make sure the oil charge pipe is not deformed or