Subaru 2009 IMPREZA Service Manual page 2217

REAR SUSPENSION
4. Rear Trailing Link
A: REMOVAL
1) Lift up the vehicle, and then remove the rear
wheels.
2) Remove the bracket, and remove the parking
brake cable from the guide.
(1)
(1) Guide
3) Remove the trailing link.
B: INSTALLATION
CAUTION:
• Be sure to use a new self-locking nut.
• Always tighten the bushing in the state where
the vehicle is at curb weight and the wheels are
in full contact with the ground.
Install in the reverse order of removal.
Tightening torque:
90 N·m (9.2 kgf-m, 66.4 ft-lb)
Rear Trailing Link
C: DISASSEMBLY
1. REAR TRAILING LINK BUSHING
Using the ST A and ST B, press the bushing out.
ST A 8998741000 INSTALLER
ST B 499755602 PRESS
RS-00253
2. REAR HOUSING BUSHING
1) Remove the rear housing. <Ref. to DS-19, RE-
MOVAL, Rear Axle.>
RS-00254
RS-10
ST-A
ST-B
RS-00255