Subaru 2009 IMPREZA Service Manual page 2452

Hide thumbs Also See for 2009 IMPREZA:

VDC Sequence Control

VEHICLE DYNAMICS CONTROL (VDC)

4. VDC Sequence Control

A: OPERATION

1) While the VDC sequence control is performed,

the operation of the hydraulic unit can be checked

using the brake tester or pressure gauge after the

hydraulic unit solenoid valve is operated.

2) VDC sequence control can be started by Subaru

Select Monitor.

1. VDC SEQUENCE CONTROL WITH

SUBARU SELECT MONITOR

In the event of any trouble, sequence control will

not operate.

1) Connect the Subaru Select Monitor to data link

connector under the driver's side instrument panel

lower cover.

2) Turn the ignition switch to ON.

3) Run the "PC application help for Subaru Select

4) Set the Subaru Select Monitor to "Brake Control"

5) When the "VDC Inspection Mode" is selected

from the "Function check sequence" menu, the

"VDC sequence control" will start.

6) Operation points will be displayed on Subaru Se-

lect Monitor.