Subaru 2009 IMPREZA Service Manual page 1828

Step
5 CHECK SHIFT LOCK.
1) Shift the select lever to "N" range.
2) Turn the ignition switch to OFF.
6 CHECK KEY INTERLOCK.
1) Turn the ignition switch to OFF.
2) Shift the select lever to other than "P" range.
7 CHECK KEY INTERLOCK.
Shift the select lever to "P" range.
AT Shift Lock Control System
While brake pedal is
depressed, is it possible to
move the select lever from the
"N" range to the "P" range?
Can the ignition key be
removed?
Can the ignition key be
removed?
CS-11
Check Yes
Go to step 6.
Perform the
inspection of "KEY
INTERLOCK CAN-
NOT BE LOCKED
OR RELEASED".
<Ref. to CS-17,
KEY INTERLOCK
CANNOT BE
LOCKED OR
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>
AT shift lock sys-
tem is normal.
CONTROL SYSTEMS
No
Perform the
inspection of
"SELECT LEVER
CANNOT BE
LOCKED OR
RELEASED".
<Ref. to CS-14,
SELECT LEVER
CANNOT BE
LOCKED OR
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>
Go to step 7.
Perform the
inspection of "KEY
INTERLOCK CAN-
NOT BE LOCKED
OR RELEASED".
<Ref. to CS-17,
KEY INTERLOCK
CANNOT BE
LOCKED OR
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>