Subaru 2009 IMPREZA Service Manual page 2641

POWER ASSISTED SYSTEM (POWER STEERING)
11) Disconnect the pipe C from pressure hose first,
then disconnect pipe D from the return hose.
(1) Pipe C
(2) Pipe D
(3) Pressure hose
(4) Return hose
12) Remove the clamp bolts securing the gearbox
to the crossmember, and remove the clamp.
(1) Clamp
Steering Gearbox
(4)
(3)
(2)
(1)
PS-00538
(1)
PS-00554
13) Remove the bolts which secure the gearbox
bracket, and remove the bracket and gearbox.
(1) Bracket
B: INSTALLATION
1) Insert the gearbox into crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Temporarily
tighten the bolts.
(1) Bracket
3) Insert bolts through the clamp to temporarily
tighten the gearbox to the crossmember bracket.
(1) Clamp
4) Tighten the bolts temporarily holding the gear-
box clamp and bracket together to the specified
torque.
Tightening torque:
60 N·m (6.1 kgf-m, 44.3 ft-lb)
PS-18
(1)
PS-00555
(1)
PS-00555
(1)
PS-00554