Subaru 2009 IMPREZA Service Manual page 1982

AUTOMATIC TRANSMISSION
16) Install the thrust needle bearing in the correct
direction.
(A)
(B)
(A) Thrust needle bearing
(B) Front planetary carrier
(C) Rear sun gear side
(D) Front planetary carrier side
17) Install the front planetary carrier to the low
clutch drum.
(A)
(A) Front planetary carrier
(B) Low clutch drum
18) Install the snap ring to the low clutch drum.
(A)
(A) Snap ring
(B) Front planetary carrier
AT Main Case
19) Install the needle bearing, and then secure with
the snap ring.
(C)
(D)
AT-00280
20) Install the one-way clutch and one-way clutch
inner race, then secure with the snap ring.
21) Set the inner race. Make sure that the clutch
locks in the clockwise direction and rotates freely in
the counterclockwise direction.
(B)
AT-00260
3. 2-4 BRAKE
1) Apply ATF to the new D-ring, then install to the 2-
4 brake piston.
2) Install 2-4 brake piston to 2-4 brake piston re-
tainer.
NOTE:
(B)
Be careful not to damage the D-ring.
AT-00281
4AT-126
(A)
(A) Needle bearing
(B) Snap ring
(A)
(A) Locked
(B) Rotates freely
( A )
(A) 2-4 brake piston
(B) 2-4 brake piston retainer
(B)
AT-00268
(B)
AT-00282
( B )
AT-00288