Subaru 2009 IMPREZA Service Manual page 1956

Hide thumbs Also See for 2009 IMPREZA:

AUTOMATIC TRANSMISSION

3) Pull out the straight pin and pinion shaft, then re-

move the differential bevel gear, washer and differ-

ential bevel pinion.

(A) Differential case (RH)

2. SIDE RETAINER

After adjusting the drive pinion backlash and tooth

contact, remove and install the oil seal and O-ring.

1) Remove the O-ring.

2) Remove the oil seal.

Front Differential Assembly

3) Remove the split pin, and then remove the claw.

ST 398527700

(B) Split pin

4) Attach two claws to the outer race, and set the

ST to the differential side retainer.

ST 398527700

5) Restore the removed claws to original position,

and install the pin and split pin.