Subaru 2009 IMPREZA Service Manual page 2510

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Step
9 CHECK OTHER DTC DETECTION.
J: DTC C0031 FR HOLD VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
K: DTC C0032 FR PRESSURE REDUCING VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
L: DTC C0033 FL HOLD VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
M: DTC C0034 FL PRESSURE REDUCING VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
N: DTC C0035 RR HOLD VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
O: DTC C0036 RR PRESSURE REDUCING VALVE MALFUNCTION
NOTE:
For the diagnostic procedure, refer to DTC C0064 "NORMAL CLOSING VALVE 2 MALFUNCTION". <Ref. to
VDC(diag)-50, DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION, Diagnostic Procedure with Di-
agnostic Trouble Code (DTC).>
Check
Is any other DTC displayed?
VDC(diag)-48
Yes No
Perform the diag- It results from a
nosis according to temporary noise
DTC. <Ref. to interference.
VDC(diag)-33, List
NOTE:
of Diagnostic Trou-
Though the ABS
ble Code (DTC).>
warning light re-
mains on at this
time, this is normal.
Drive the vehicle at
12 km/h (7 MPH)
or more in order to
turn ABS warning
light off. Be sure to
drive the vehicle
and check that the
warning light goes
off.