Subaru 2009 IMPREZA Service Manual page 2083

Hide thumbs Also See for 2009 IMPREZA:

General Description

MANUAL TRANSMISSION AND DIFFERENTIAL

• Wear appropriate work clothing, including a cap,

protective goggles and protective shoes when per-

forming any work.

• Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

• Keep the disassembled parts in order and pro-

tect them from dust and dirt.

• Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary re-

moval, installation, disassembly and replacement.

• When disassembling the case and other light al-

loy parts, use a plastic hammer to force it apart. Do

not pry apart with screwdrivers or other tools.

• Vehicle components are extremely hot after driv-

ing. Be wary of receiving burns from heated parts.

• Use SUBARU genuine gear oil, grease or equiv-

alent. Do not mix gear oil, grease, etc. of different

grades or manufacturers.

• Be sure to tighten fasteners including bolts and

nuts to the specified torque.

• Place shop jacks or rigid racks at the specified

• Apply gear oil onto sliding or revolving surfaces

before installation.

• Replace deformed or damaged snap rings with

• Before installing O-rings or oil seals, apply suffi-

cient amount of gear oil to avoid damage and defor-

• Be careful not to incorrectly install or fail to install

O-rings, snap rings and other such parts.

• Before securing a part on a vise, place cushion-

ing material such as wood blocks, aluminum plate,

or cloth between the part and the vise.

• Avoid damaging the mating surface of the case.

• Before applying liquid gasket, completely re-

move the old liquid gasket.