Subaru 2009 IMPREZA Service Manual page 1921

Hide thumbs Also See for 2009 IMPREZA:

B: INSTALLATION

1) Install the ATF inlet pipe and outlet pipe along

with new washers.

Tightening torque:

T1: 25 N·m (2.5 kgf-m, 18.4 ft-lb)

T2: 40 N·m (4.1 kgf-m, 29.5 ft-lb)

T3: 45 N·m (4.6 kgf-m, 33.2 ft-lb)

2) Install the ATF cooler pipe to frame.

ATF Cooler Pipe and Hose

AUTOMATIC TRANSMISSION

3) Connect the ATF cooler hose to the pipe on the

transmission side.

• Install so that the hose is not folded over, exces-

sively bent or twisted.

• Insert the hose to the specified position.

4) Connect the ATF cooler hose to the pipe on the

radiator side.

• Install so that the hose is not folded over, exces-

sively bent or twisted.

• Insert the hose to the specified position.

5) Install the heat shield cover.

Tightening torque:

3 N·m (0.3 kgf-m, 2.2 ft-lb)

6) Install the under cover.

7) Install the battery.

8) Fill ATF. <Ref. to 4AT-27, Automatic Transmis-

sion Fluid.>

Make sure there are no ATF leaks in joints between

the transmission, radiator, pipes, and hoses.