Subaru 2009 IMPREZA Service Manual page 2115

C: DISASSEMBLY
1) Using the ST, remove the roller bearing (exten-
sion case side).
ST 498077000 REMOVER
(A)
(A) Roller bearing
2) Using ST1 and ST2, remove the roller bearing
(transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
(A)
(A) Roller bearing
Transfer Driven Gear
ST
MT-00143
ST2
ST1
MT-00144
5MT-43
MANUAL TRANSMISSION AND DIFFERENTIAL
D: ASSEMBLY
1) Using the ST, install the roller bearing (extension
case side).
ST1 398177700 INSTALLER
ST2 899864100 REMOVER
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A)
(A) Roller bearing
2) Using ST, install the roller bearing (transfer case
side).
ST 499757002 INSTALLER
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A) Roller bearing
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit
noise in rotation after gear oil lubrication.
2) Driven gear
If the driven gear tooth surface and shaft are exces-
sively broken or damaged, replace the driven gear.
ST2
ST1
MT-00145
ST
(A)
MT-00146