Subaru 2009 IMPREZA Service Manual page 2296

DIFFERENTIALS
19) Remove the rear differential member plate from
the rear differential.
(A)
(A) Rear differential member plate
B: INSTALLATION
1) Attach the rear differential member plate to the
rear differential.
(A)
(A) Rear differential member plate
2) Set the rear differential to transmission jack.
3) Adjust the transmission jack and properly insert
the rear differential stud bolt into rear crossmember
bushing.
Rear Differential
4) After inserting the rear differential stud bolt into
the rear crossmember bushing, lift up the transmis-
sion jack and align the rear differential to its attach-
ment position.
DI-00359
5) Install the dynamic damper assembly. (5 door
AT model)
6) Tighten a new self-locking nut temporarily to rear
DI-00359
crossmember.
7) Install the rear differential front member with a
new self-locking nut.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
T2: 110 N·m (11.2 kgf-m, 81.1 ft-lb)
DI-00517
DI-18
T2
T1
DI-00514
DI-00516
DI-00515
DI-00284