Conference Control Using Dtmf Codes - Polycom RMX DOC2579D Getting Started Manual

Chapter 3- Audio Only Basic Configuration and Operation

Conference Control Using DTMF Codes

3-76
3
Click the OK button to connect the new participant to the selected
conference.
Participants and chairpersons can manage their connection to ongoing
conferences from their endpoints, using touch-tone signals (DTMF codes)
from their endpoints. Table 3-9 lists the DTMF Codes that can be used.
Chairpersons can also control an ongoing conference using DTMF codes.
Permissions for DTMF actions to be performed by all conference
participants or by chairperson only are configured in the Conference IVR
Service assigned to the conference.
For more information, see the RMX 1500/2000/4000 Administrator's Guide,
"Defining a New Conference IVR Service" on page 14-9.
To use the DTMF codes to control the conference, the DTMF input must
be first enabled on the endpoint remote control (for example, entering #).
Table 3-11 Default DTMF Codes to Manage Conferences and Participants
Operation
Individual help
Conference help
Mute My Line
Unmute My Line
Increase Broadcast Volume
Decrease Broadcast Volume
Mute All Except Me
Cancel Mute All Except Me
Change Password
Mute Incoming Participants
Unmute Incoming Participants
Play Help Menu
DTMF String Permission
*0 All
00 Chairperson
*6 All
#6 All
*9 All
#9 All
*5 Chairperson
#5 Chairperson
*77 Chairperson
*86 Chairperson
#86 Chairperson
*83 All