Quarter Glass Removal/Installation - Hyundai Tiburon 2003 Workshop Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Interior > quarter glass > Repair
procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body (Interior and Exterior) > Interior > quarter
glass > Repair procedures
REMOVAL
1. To remove the quarter fixed glass, first remove the following parts:
(1) Covering shelf center trim and side trim.
(2) Rear speaker grill and speaker.
(3) Rear seat cushion.
(4) Rear seat back.
(5) Rear seat belt upper anchor mounting bolt.
(6) Rear seat back lower side bracket.
(7) Rear quarter inner trim.
(8) Front seat belt upper anchor mounting bolt.
(9) Center pillar trim.
2. After removing the quarter fixed glass molding, cut the sealant using the Special Tool.
3. Remove the quarter fixed glass mounting clips.
4. Remove the quarter fixed glass.
INSTALLATION
1. Using a cutter knife or the Special Tool, scrape the old sealant smoothly to a thicknes of about 2 mm (0.08 in)
on the bonding surface aroundthe entire quarter fixed glass flange.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 1 of 3
24.04.2008