Steering System Troubleshooting - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:
Table of Contents

Advertisement

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Steering System > General Information > Troubleshooting,
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Steering System > General Information > Troubleshooting
TROUBLESHOOTING
POWER STEERING
Symptom
Excessive play in steering
wheel
Steering wheel operation
is not smooth (Insufficient
power assist)
Steering wheel does not
return properly
Noise
Rattling or chucking noise
in the rack and pinion
Noise in the oil pump
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Probable cause
Loose yoke plug
Loose steering gear mounting bolts
Loose or worn tie rod end
V-belt slippage
Damaged V-belt
Low fluid level
Air in the fluid
Twisted or damaged hoses
Insufficient oil pump pressure
Sticky flow control valve
Excessive internal oil pump leakage
Excessive oil leaks from rack and pinion in gear box
Distorted or damaged gear box or valve body seale
Excessive turning resistance of tie-rod end
Yoke plug excessively tight
Inner tie rod and/or ball joint cannot turn smoothly
Loose mounting of gear box and crossmember
Worn steering shaft joint and/or body grommet
Distorted rack
Damaged pinion bearing
Twisted or damaged hoses
Damaged oil pressure control valve
Damaged oil pump input shaft bearing
Hissing Noise in Steering Gear
There is some noise with all power steering systems.
One of the most common is a hissing sound when the
steering wheel is turned and the car is not moving.
This noise will be most evident when turning the wheel
while the brakes are being applied.
There is no relationship between this noise and
steering performance.
Do not replace the valve unless the "hissing" noise
becomes extreme.
A replaced valve will also make a slight noise, and is
not always a solution for the condition.
Interference with hoses from vehicle body
Loose gear box bracket
Loose tie rod end and/or ball joint
Worn tie rod and/or ball joint
Low fluid level
Air in the fluid
Loose pump mounting bolts
Page 1 of 1
Remedy
Retighten
Retighten
Retighten or place as
necessary
Readjust
Replace
Replenish
Bleed air
Correct the rougting or
replace
Repair or replace the oil
pump
Replace
Replace the damaged
parts
Replace the damaged
parts
Replace
Replace
Adjust
Replace
Retighten
Correct or replace
Replace
Replace
Reposition or replace
Replace
Replace
Reposition
Retighten
Retighten
Replace
Replenish
Bleed air
Retighten
24.04.2008

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents