Hyundai Tiburon 2003 Workshop Manual page 652

CIRCUIT INSPECTION
DTC
CIRCUIT DESCRIPTION
DTC Detecting Condition
• Too high or low resistance between DAB high (+) wiring
harness and DAB low (-) wiring harness of squib.
• DAB malfunction
• Clock spring malfunction
• SRSCM malfunction
WIRING DIAGRAM
INSPECTION PROCEDURE
1. Preparation
(1) Disconnect the negative (-) terminal cable from the battery, and wait at least 30 seconds.
(2) Remove the DAB module.
(3) Disconnect the connectors of the PAB, left and right side airbags, belt pretensioners and satellite sensors.
(4) Disconnect the SRSCM connector.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
DAB resistance too high (R ≥ 6.70
B1346
B1347 DAB resistance too low (R ≤ 1.06
Trouble Area
• DAB squib
• Clock spring
• SRSCM
• Wire harness
Page 18 of 34
)
)
24.04.2008