discontinued.
Battery voltage
When applied
When discontinued
5. Measure the current between the terminals of the solenoid valve.
EVAP Canister Purge Solenoid Valve
Coil at 20° C (68° F) : 0.45A or below (at 12V)
Coil resistance : 26
[at 20° C (68° F)]
VACUUM HOSE
Engine coolant temperature : 80~95° C (176~205° F)
1. Disconnect the vacuum hose from the intake manifold purge hose nipple and connect a hand vacuum pump to the
nipple.
2. Start the engine and check that, after raising the engine speed by racing the engine, vacuum remains fairly constant.
If there is no vacuum created the intake manifold port may be clogged and require cleaning.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 3
Normal condition
Vacuum is released
Vacuum is maintained
24.04.2008