Table of Contents
Advertisement
HANDLING WIRES AND HARNESSES
1. Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
2. Remove clips carefully; don't damage their locks (A).
3. Slip pliers(A) under the clip base and through the hole at an angle, then squeeze the expansion tabs to
release the clip.
4. After installing harness clips, make sure the harness doesn't interfere with any moving parts.
5. Keep wire harnesses away from exhaust pipes and other hot parts, from sharp edges of brackets and holes,
and from exposed screws and bolts.
6. Seat grommets in their grooves properly (A). Do not leave grommets distorted (B).
TESTING AND REPAIRS
1. Do not use wires or harnesses with broken insulation.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 3 of 4
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
