Audio Fault Code - Hyundai Tiburon 2003 Workshop Manual

AUDIO FAULT CODE

If you see any error indication in the display while using the CD or Tape mode, find the cause in the chart below.
INDICATION
CDP deck mechanical error
Er2
(eject error, loading error)
Focus error
Er3
Data read error
Er6 Disc error
Tape deck error
Er8
Tape eject error
HHH Temperature is too high
No disc in magazine
no CD
No CD magazine in the auto change
In order to reset the audio, pull out the audio fuse (10A) in the body control module after waiting at least 10
seconds, then insert the audio fuse.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
CAUSE
After resetting the audio, push the eject button.
If disc is not ejected, consult your hyundai dealer.
Make sure the disc is not scratched or damaged.
Press the eject button and pull out the disc.
Then insert a normal CD disc.
Check if the disc is inserted correctly in the CD player.
Make sure the disc is not scratched or damaged.
After resetting the audio, push the eject button.
If tape is not ejected, consult your hyundai dealer.
Fault code will reset automatically when the
temperature returns to normal.
Insert disc in magazine or insert CD magazine in the
auto changer.
Page 2 of 2
SOLUTION
24.04.2008