Lift And Support Point - Hyundai Tiburon 2003 Workshop Manual

1. Model Year
- 4 : 2004
2. Manufacturer Subcode
- HYX : HYUNDAI MOTOR
3. Family Type
- V : Passenger car
4. Displacement
5. Sequence Characters
C :
1. Model Year
- 4 : 2004
2. Manufacturer Subcode
- HYX : HYUNDAI MOTOR
3. Family Type
- R : EVAP/ORVR
4. Canister Work Capacity
5. Sequence Characters

LIFT AND SUPPORT POINT

When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place
additional weight in the luggage area before hoisting . When substatial weight is removed from the rear of the vehicle the, center
of gravity may change and cam cause the vehicle to tip forward on the hoist.
• Since each tire/wheel assembly weights approximately 30lbs 14kg), placing the front wheels in the luggage area can assist
with weight distribution.
• Use the same support points to support the vehicle on safely stands.
1. Place the lift blocks under the support points as shown in the illustration.
2. Raise the hoist a few inches (centimerers) and rock the vehicle to be sure it is firmly supported.
3. Raise the hoist to full height to inspect the lift points for secure support.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 8 of 20
24.04.2008