Bleeding - Hyundai Tiburon 2003 Workshop Manual

BLEEDING

Use the specified fluid. Avoid mixing different brands of fluid.
SAE J1703 (DOT 3 or DOT 4)
1. Loosen the bleeder screw at the clutch release cylinder.
2. Push the clutch pedal down slowly until all is expelled.
3. Hold the clutch pedal down until the bleeder is retightened.
4. Refill the clutch master cylinder with the specified fluid.
The rapidly-repeated operation of the clutch pedal in B-C range may cause the release cylinder's position
to be forcedout from the release cylinder body during air bleeding, Repress the clutch pedal after it
returns to the "A" point completely.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 2
24.04.2008