Hyundai Tiburon 2003 Workshop Manual page 62

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Starting System > Starter Relay >
Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Starting
System > Starter Relay > Repair procedures
INSPECTION
1. Remove the fuse box cover.
2. Remove the starter relay(A).
3. Inspect the relay continuity.
A. Using an ohmmeter, check that there is continuity between terminals 2 and 4.
If there is no continuity, replace the relay.
B. Check that there is no continuity between terminals 1 and 5.
If there is continuity, replace the relay.
4. Inspect the relay operation.
A. Apply battery positive voltage across terminals 2 and 4.
B. Using an ohmmeter, check that there is continuity between terminals 1 and 5.
If there is no continuity, replace the relay.
5. Install the starter relay.
6. Install the fuse box cover.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 1 of 1
24.04.2008