Hyundai Tiburon 2003 Workshop Manual page 47

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Charging System > Alternator >
Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Charging
System > Alternator > Repair procedures
REPLACEMENT
1. Disconnect the battery negative terminal first, then the positive terminal.
2. Disconnect the generator connector(A) and "B" terminal cable(B) from the generator(C).
3. Remove the adjusting bolt(A) and mounting bolt(B), then remove the generator belt(C).
4. Pull out the through bolt(C), then remove the generator(D).
5. Installation is the reverse of removal.
6. Adjust the generator belt tension after installation (See page EE-33 ).
1. Disconnect the battery negative terminal first then the positive terminal.
2. Loosen the drive belt tension adjusting bolt, then remove the drive belt(A).
3. Disconnect the connector(A) and "B" terminal cable(B).
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 1 of 4
24.04.2008