Hyundai Tiburon 2003 Workshop Manual page 98

6. Using the special tool, the camshaft oil seal installer (09221-21000), install the camshaft oil seal. Be sure to
apply engine oil to the externalsurface of the oil seal.
Insert the oil seal along the camshaft front end and install it with a hammer until it is seated.
7. Install the camshaft sprocket to the specified torque.
Tightening torque
Camshaft sprocket bolt :
90 ~ 110Nm (900 ~ 1100kg.cm, 65 ~ 80lb.ft)
8. Install the cylinder head cover.
Tightening torque
Cylinder head cover bolts :
8 ~ 10Nm (80 ~ 100kg.cm, 5.8 ~ 7.2lb.ft)
(1) Tighten all bolts temporarily to half of the specified torque in the sequence 1.2.3.4.5.6.7.8.
(2) Retighten all bolts to the specified torque.
9. Install the spark plug cables and, center cover.
10. Install the timing belt and then tighten the auto tensioner pulley.
11. Install the timing belt cover.
12. Install the power steering pulley, air conditioner pulley, crankshaft pulley and tensioner pulley.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 5 of 6
24.04.2008