Hyundai Tiburon 2003 Workshop Manual page 660

Place the DAB with the front surface facing upward.
2. Check the BPT resistance.
[PREPARATION]
Release the airbag activation prevention mechanism on the SRSCM side of the airbag squib side. Connect the dummy
(0957A-38200) and dummy adapter(0957A-38300) to the BPT connector of the SRSCM connector side.
Before checking the resistance, you have to insert the shorting bar insert plastic that is attached to the diagnosis
checker into the SRSCM connector.
[CHECK]
Measure the resistance between the BPT high (+) and the BPT low (-).
1.6 ≤ R ≤ 2.8
3. Check the BPT squib.
[PREPARATION]
A. Turn the ignition switch to LOCK.
B. Disconnect the negative (-) terminal cable from the battery, and wait for 30 seconds.
C. Connect the BPT connector.
D. Connect the negative (-) terminal cable to the battery, and wait for 30 seconds.
[CHECK]
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 26 of 34
24.04.2008