Hyundai Tiburon 2003 Workshop Manual page 711

Page 4 of 8
Do not confuse the left and right sides.
4. Install the cable to the guide assembly.
5. Move the timing front edge to be aligned with the slide of the guide assembly.
6. Align the protrusion of the slide with the groove of the shutting.
7. Grab the pin by finger to avoid inteference with other parts.
8. Face the protrusion of "shoe A" upward, the cushion of "shoe B" downward.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title... 24.04.2008