Table of Contents
Advertisement
5. Clean the inner race, cage and balls without disassembling.
6. Remove the birfield joint boot bands and pull out the double offset joint boot and birfield joint boot.
If the boot is to be reused, wrap tape around the driveshaft splines to protect the boot.
DISASSEMBLY
• Do not disassemble the birfield joint assembly.
• Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
• The boot band should be replaced with a new one.
1. Remove the tripod joint boot bands and pull the tripod joint boot from the tripod joint case.
Be careful not to damage the boot.
2. Remove the snap ring and spider assembly from the driveshaft.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 5 of 8
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
