Table of Contents
Advertisement
Page 3 of 4
REPLACEMENT
CRUISE CONTROL UNIT AND CABLE
1. Loosen the locknuts(A) and disconnect the actuator cable (B) from the throttle linkage(C).
2. Disconnect the cruise control unit connector(D).
3. Loosen the three mounting bolts(E), and remove the cruise control unit with the bracket(F).
4. Loosen the locknuts(A) and disconnect the actuator cable(B) from the cruise control unit.
5. Installation is the reverse of removal.
CRUISE CONTROL SWITCH REPLACEMENT
1. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least three minutes.
2. Remove the driver's airbg (See page RT).
3. Disconnect the control switch connector(A).
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
