Driveshaft And Axle Special Tools - Hyundai Tiburon 2003 Workshop Manual

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Special Service
Tools, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Driveshaft and axle > General Information > Special
Service Tools
SPECIAL TOOLS
Tool (Number and Name)
09216-21100
Mounting bushing remover and
installer
09495-33000
Puller
09495-33100
Center bearing remover and
installer
09517-21500
Front hub remover and installer
09517-29000
Knuckle arm bridge
09517-43001
Bearing puller
09532-11600
Preload socket
09532-11500
Pinion bearing outer race
09568-34000
Ball joint puller
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Illustration
Removal of the center bearing (Use with
09495-33100)
Removal of wheel bearing inner race from
the hub.
1. Removal of wheel bearing from the
2. Installation of hub to the knuckle.
3. Removal of the center bearing (Use with
1. Removal of front hub from the knuckle.
2. Measurement of front wheel bearing
1. Removal of wheel bearing outer race
Removal of the center bearing bracket
Measurement of front wheel bearing pre-
load. (Use with 09517-21500)
Installation of wheel bearing to the knuckle.
Separation of front lower arm and tie rod
end ball joint.
Use
knuckle. (Use with 09517-29000)
09216-21100)
(Use with 09517-29000)
pre-load. (Use with 09532-11600)
from the knuckle. (Use with 09495-
33100)
Page 1 of 2
24.04.2008