Rear Window Defogger Printed Heater Inspection - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body Electrical System > Rear Window Defogger > Rear

Window Defogger Printed Heater > Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Body

Electrical System > Rear Window Defogger > Rear Window Defogger Printed Heater > Repair

Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger

pressure on the tin foil, moving the tin foil along the grid line to check for open circuits.

1. Turn on the defogger switch and use a voltmeter to measure the voltage of each heater line at the glass

center point. If a voltage of approximately 6V is indicated by the voltmeter, the heater line of the rear window

is consideredsatisfactory.

2. If a heater line is burned out between the center point and (+) terminal, the voltmeter will indicate 12V.

3. If a heater line is burned out between the center point and (-) terminal, the voltmeter will indicate 0V.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents

Troubleshooting