Table of Contents
Advertisement
Page 2 of 2
1. Never attempt to disassemble or repair the BPT.
2. Do not drop the BPT or allow contact with water, grease, oil.
Replace it if a dent, crack, deformation or rust are detected.
3. Do not place anything on the BPT.
4. Do not expose the BPT to temperature over 93° C(20 0°F).
5. BPT functions one time only. Be sure to replace the BPT after it is deployed.
6. Be sure to wear gloves and safety goggles when handling the deployed BPT.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
