Hyundai Tiburon 2003 Workshop Manual page 118

2. Install the upper side rail. To install the side rail, first put one end of the side rail between the piston ring
groove and spacer, hold it firmly, and press down with finger on the portion to be inserted into the groove (as
illustrated).
Do not use a piston ring expander when installing the side rail.
3. Install the lower side rail by the same procedure described in Step 2.
4. Apply engine oil around the piston and piston grooves.
5. Using a piston ring expander, install the No.2 piston ring.
6. Install the No. 1 piston ring.
7. Position each piston ring end gap as far away from its neighboring gaps as possible. Make sure that the gaps
are not positioned in the thrust and pin directions.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 4 of 6
24.04.2008