Brake Switch Test; Cruise Control Switch Test - Hyundai Tiburon 2003 Workshop Manual

Hide thumbs Also See for Tiburon 2003:

Table of Contents

TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Cruise Control System > Repair

procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Engine Electrical System > Cruise Control

System > Repair procedures

1. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least three minutes.

2. Remove the driver's airbag (See page RT).

3. Disconnect the control switch connector.

4. Check the continuity between the terminals of the connector in each switch position according to the table.

A. If there is continuity, and it matches the table, the switch is O.K.

B. If there is no continuity, replace the control switch.

BRAKE SWITCH TEST

1. Disconnect the connector from the brake switch.

2. Remove the brake switch.

http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...

Show Quick Links

Table of Contents