Table of Contents
Advertisement
When using an impact gun, final tightening torque should be checked using a torque wrench.
2. Tightening order
Check the torque again after tightening the wheel nuts diagonally.
WHEEL ROTATION
Rotate the tires in the pattern illustrated.
When rotating the 215/45 ZR17 tires, ensure to follow the "ROTATION"direction marked on the sidewall of
tires.
When rotating the tires of the left and right, seperate the wheel from the tire and then re-assemble them.
CHECKING FOR PULL AND WANDER
1. If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.
A. Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability.
B. If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again.
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 3 of 4
24.04.2008
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
