Master Cylinder Inspection; Master Cylinder Reassembly - Hyundai Tiburon 2003 Workshop Manual

4. Remove the primary cylinder pin, pushing the primary piston with a screwdriver and remove the primary piston
assembly.
5. Remove the secondary cylinder pin. Push the secondary piston with a screwdriver and remove the secondary
piston assembly.
Do not disassemble the primary and secondary piston assembly.
INSPECTION
1. Check the master cylinder bore for rust or scoring.
2. Check the master cylinder for wear or damage. If necessary, clean or replace the cylinder.
1. If the cylinder bore is damaged, replace the master cylinder assembly.
2. Wash the parts in alchohol.
REASSEMBLY
http://www.hmaservice.com/viewer/content.asp?IsPrint=true&imgnum=1&print_title...
Page 2 of 3
24.04.2008